The Ultimate Guide to

Simple Ways to Clean a Glass Pipe for Early Marijuana Smokers

Most of us have learned the hard way from pipes that any failure to clean them will result in filthiness and it can’t be used for any consumable water. Technically, dirty clothes and even your stove will not result in death when you use them but it will be unhygienic and unsightful. Glass pipes too require constant cleaning to ensure that they are fit for use. You will find that a pipe that is caked in ash and resin are potentially carcinogenic. This will also cause the glass pipe’s degradation and ruin. A user experienced will tell you that smoking out of a clean cheap glass pipe will give you the chance to experience the best taste of the product.

The simplest procedure works best for the economical type who are using the nice cheap glass pipes. The best method is always the easiest and fastest. Here is how to clean your cheap glass pipes simply. Ensure that you follow up this method well.

If you decide to use the cleaning water method, you should ensure that you have emptied all the debris from the pipe bowl. Turn the bowl upside down, shake it and scoop the debris with a paper towel. You can then put the cheap glass pipes in a pot of boiling water or pour the boiled water over the glass. You can add dishwashing liquid or salt into the boiling water.

It is important that you leave the cheap glass pipes in the boiling water for about 30 minutes. To scrub the softened resin from the glass pipes, you can use the paper towel. It will be necessary to continue cleaning the resin and cakes for some time before you can rinse thoroughly the cheap glass pipe.

Rubbing alcohol can serve the good purpose if boiling water isn’t working well with the cheap glass pipe. To avoid breaking the cheap glass pipe, choose the rubbing alcohol to make the whole glass pipe cleaned. An abrasion factor or salt works best with alcohol to clean the cheap glass pipes. Put a lot of alcohol that is enough to cover the pipe in a bag. You can add some salt to the alcohol and shake it for some minutes.

You can the put some slats into the interior of the cheap glass pipe and ensure that all the holes are closed with your fingers. You then shake the salt inside the pipe to ensure that its abrasive nature will remove all the tar and resin. At this point, the pipe can stay in the salt and alcohol for the whole night. You can the shake again and rinse the pipe thoroughly.